Oops! This site has expired. If you are the site owner, please renew your premium subscription or contact support.

Title

Subtitle

BPI Canada Listed Materials & Products

To identify work that could improve the energy efficiency of your home, you need to decide where you would like to start.  Typically this work would be called "energy conservation measures" (ECMs).  For each ECM, you would then determine the appropriate material, product, material specification and the appropriate installation and application standard.

Based on the ECM's, BPI Canada identifies materials and product specification standards, installation standards and application standards that are applicable to improvement work being done on existing residential homes. 

To be able to quickly identify what are the appropriate standards for the specific work, BPI Canada has grouped them together.

The most common EMC's fall under the general headings of:

Air leakage Control (Air Sealing)

Insulation

Doors and Windows

Siding and Cladding

 

Make sure that the contractor doing work for you, uses a material that has met the applicable standard and that they have obtained a material listing on the BPI Canada website.

Insulation materials and products which have completed the BPI evaluation and listing process

 

Loose-Fill Cellulose Fiber

Manufacturer

Material name

BPI Canada

master specification

XXXXX

XXXXXX

XXXX

These materials are tested to CAN/ULC S703 Standard for cellulose fiber insulation (CFI) for buildings

 

Loose-Fill Mineral Fiber

Manufacturer

Material name

BPI Canada

master specification

XXXXX

XXXXXX

XXXX

These materials are tested to CAN/ULC S702 Standard for mineral fiber insulation for buildings

 

Blown-In Glass Fiber

Manufacturer

Material name

BPI Canada

master specification

XXXXX

XXXXXX

XXXX

These materials are tested to CAN/ULC S702 Standard for mineral fiber insulation for buildings

 

Fiber Glass Batts

Manufacturer

Material name

BPI Canada

master specification

XXXXX

XXXXXX

XXXX

These materials are tested to CAN/ULC S702 Standard for mineral fiber insulation for buildings

 

Mineral Fiber Batts

Manufacturer

Material name

BPI Canada

master specification

XXXXX

XXXXXX

XXXX

These materials are tested to CAN/ULC S702 Standard for mineral fiber insulation for buildings

 

Open Cell Spray Polyurethane Foam

Manufacturer

Material name

BPI Canada

master specification

XXXXX

XXXXXX

XXXX

These materials are tested to CAN/ULC S712.1 Standard for thermal insulation – Spray applied semi-rigid polyurethane foam, Light density – Material - Specification

 

Closed Cell Spray Polyurethane Foam

Manufacturer

Material name

BPI Canada

master specification

XXXXX

XXXXXX

XXXX

These materials are tested to CAN/ULC S705.1 Standard for thermal insulation – Spray applied rigid polyurethane foam, Medium density – Material - Specification

 

Extruded Polystyrene Boardstock

Manufacturer

Material name

BPI Canada

master specification

XXXXX

XXXXXX

XXXX

These materials are tested to CAN/ULC S701 Standard for thermal insulation, Polystyrene, Boards and pipe coverings

 

Expanded Polystyrene Boardstock

Manufacturer

Material name

BPI Canada

master specification

XXXXX

XXXXXX

XXXX

These materials are tested to CAN/ULC S704 Thermal insulation, Polyurethane and polyisocyanurate, Boards, Faced

 

Polyurethane and Polyisocyanurate, Boards, Faced

Manufacturer

Material name

BPI Canada

master specification

XXXXX

XXXXXX

XXXX

These materials are tested to CAN/ULC S704 Thermal insulation, Polyurethane and polyisocyanurate, Boards, Faced

Subscribe To Our Site

Announcements

Send to a friend

Recent Blog Entries

Upcoming Events